Utilitarian Consequentialist Viewpoint in Human Cloning

Utilitarian Consequentialist Viewpoint in Human Cloning Introduction Human cloning has been a contentious subject marked with heated debate. However, most people seem to incline to the position that human cloning at the present time is unethical for a number of reasons including the likelihood of harm to participants and the safety of techniques used. An action is considered ethical if it portrays a commitment to honor other. This is the focus of the utilitarian consequentialist position, to maximize others overall good, as well as, the good of ones self. From a utilitarian consequentialist viewpoint, human cloning is considered unethical. This paper is an evaluation of the utilitarian consequentialist viewpoint concerning the issue of human cloning. Human Cloning To those in favor of human cloning, their arguments often revolve around the idea of addressing reproduction; however, such arguments tend to focus on the narrow benefits involved (Caplan, 2014). This does not mean that such arguments lack merit; some arguments in favor of human cloning in some way uphold the most meaningful and deepest shared societal values. In anticipation of human cloning, proponents have raised possible benefits including avoiding the risk of genetic diseases, allow couples of the same sex to have children, a solution to infertility, replace lost children or spouses and replication of talent. On the other hand, opponents have their own reasons revolving on the ethics of the technological application. For example, violation of the convention moral norms experimenting on humans, potential harm on cloned individuals and the effect of the technology on the relationship between generations (Devolder, 2013). However, both sides concur on the need to reflection on the social and ethical implication of human cloning. Utilitarian Consequentialist Viewpoint and Evaluation Utilitarian consequentialism is founded on the idea that an action is evaluated in terms of pleasure and pain in causes; utilitarianism attempt to weigh the two options in arriving at a moral decision that yields the least pain and most happiness. Concerning the issue of human cloning, a utilitarian consequentialist would weigh the pleasure and pain produced by the technology (Petrillo, 2014). Nevertheless, it does not mean that because human cloning may result in overall happiness for a greater majority, it is ethically accepted. It is true that human cloning has a number of potential positive benefits as mention earlier; however, it also has its own negative aspect. From a utilitarian consequentialist viewpoint, after weighing the perceived pleasure and potential pains, human cloning should not be permitted as it would result in more pain to the cloned individuals and the society since the clones will exist as copies or spare part of the existing humans. The utilitarian consequentialist viewpoint in human cloning holds some water and is arguable to be valid because allowing human cloning will be like setting the foundation for capacities that can alter humans at the genetic level. It is evident from previous human actions that actions of this nature have had a significant effect on the human genetic pool (Kuhse, Schuklenk Singer, 2015). For example, the treatment of diabetes using insulin has prolonged the lives of individuals with diabetes that would have died before reproducing and thus has contributed to an increase in diabetes gene in the population genetic pool. Engagement in human cloning without reflecting on the potentially serious and unanticipated consequence would be a great mistake in the human history. Given the importance of what is a stake, the scientist should be modest in attempting to alter human procreation and life, particularly when there is no compelling reason. Alongside the many potential negative consequence s to the society and the cloned individuals, this justifies utilitarian consequentialist viewpoint in human cloning. Conclusion Though it may not be possible to know the long-term consequences of human cloning, the utilitarian consequentialist viewpoint holds that human cloning should not be permitted as it would result in more pain to cloned individuals and the society. The proponents and opponents of human cloning seem to concur on the need to reflect on the social and ethical implication of human cloning, thus pointing to the justification of the utilitarian consequentialist viewpoint in human cloning. References Caplan, A. (2014). Raymond Waggoner Lectures-Arthur Caplan, What is Wrong With Human Cloning?: The Ethics of Technological Reproduction, 1998. Devolder, K. (2013). Were it physically safe, reproductive human cloning would be acceptable Kuhse, H., Schuklenk, U., Singer, P. (2015). Bioethics: an anthology(Vol. 40). John Wiley Sons. Petrillo, S. (2014). Moral Theories and Cloning in Kazuo Ishiguros Never Let Me Go. Berkeley Undergraduate Journal, 27(1).

Essay examples --

The main purpose of the article is to take a look at previously conducted research from the years 2000-2012, on the effectiveness of drug treatment programs. The main population of this research focuses in on prisoners, parolees, and probationers. The research suggested that those who were actively participating in cognitive-behavioral therapy, drug courts, and therapeutic communities had lower rates of drug use then those who did not receive these treatments. Researchers also conducted that effective treatment programs have these things going for them, emphasis on high-risk offenders, provided strong inducements to receive treatment, multiple interventions in the same time frame, intense treatment provided, and finally include aftercare. This article ties in perfectly with our research topic of the effectiveness of Narcotics Anonymous treatment programs. We will focus in more in depth at the numbers associated with this article to provide a full understanding of our research. Chen, Gila. 2006. â€Å"Social Support, Spiritual Program, and Addiction Recovery.† International Journal of Offender Therapy and Comparative Criminology. 50(3): 306-323. The author, social science researcher and lecturer at Bar-Ilan University, Gila Chen, PhD., focuses on the personal and emotional adjustments of inmates, who are recovering from substance addiction/abuse and who participated in a therapeutic intervention programs. There were two groups to her research: one group went through social support program that included spiritual factors (Narcotics Anonymous meetings with the 12-step course) while the other group went through a primarily social support program (Narcotics Anonymous meetings without the 12-step course). She had hypothesized that those w... ...statistical techniques. Regarding question one: for retention, the correlation was close to zero. For commitment, data suggested that individuals with higher levels of religiosity possessed higher levels of commitment to treatment. Overall, data indicates a weak to moderate relationship between religiosity and treatment outcomes. However, in some programs religiosity affiliation could be viewed as a positive resource whereas in other programs religiosity was a hindrance to recovery. For question two, data indicates that religiosity can be an effective resource to enhance retention if the clientele viewed religion as an important source to treatment recovery. For question three, data suggested that program religious emphasis was not related to retention. For commitment to treatment, level of program religious emphasis was significantly related to positive outcomes.

Motive To Study At Bangor University Motivation Factors Education Essay

In general, the term â€Å" motive † is defined as the determination doing procedure that initiates, argues and thrusts to accomplish the ends of an person or administration. Writers believe that assorted factors contribute to motive. For illustration, in their article â€Å" Self Focused attending, public presentation anticipations and the strength of attempt: Do Peoples seek harder for harder ends? † Daniel et Al ( 2010, pg 2 ) , province â€Å" Brehm ‘s motivational strength theory nevertheless proposes that attempt is non rather so simple. This theoretical account assumes that the mobilisation of bodily resources is dearly-won, so people will set away every bit much attempt as necessary to accomplish a end. † I tend to hold with this theoretical account as it stressed on how one should do attempt to accomplish the ends alternatively of blowing clip. I used this theoretical account as a footing when taking my categories while maintaining in head my overa ll ends. Harmonizing to me motive is the cardinal driver for determination devising procedure With this in head, my two chief motivational factors to prosecute my MBA from Bangor are: Professional and personal. On a professional forepart, I besides wanted to analyze in a UK university that is little plenty to see a one to one interactive with the module and it at the same clip it provides a dynamic acquisition environment. As I read about the university online, I found it really interesting that is had â€Å" An impressive 93 % satisfaction evaluation was given by Bangor Business School pupils in the most recent National Students Survey † . This clearly reflects on learning and larning experience within the university. Furthermore Bangor University is good recognised in UK is besides a motive factor. In add-on, I feel the concern universe is acquiring smaller and bulk of employees within companies today are from diverse civilizations. Bangor University ‘s rich and diverse civilization will assist me during my group undertakings and heighten my communicating accomplishments further. In general, I am trusting that the cognition and experience I gain from Bangor University will do be better prepared for the existent universe concern experience. I found Bangor to be the best university with elect squad of professors and classs that help in constructing a strong foundation for us as we get ready to confront the ‘real ‘ concern universe. Again, this will fulfill my â€Å" societal and esteem demands † ( Maslow Hierarchy Need ) . On a personal degree, my brother graduated with an MBA grade from Bangor. He enjoyed his experience at the university. He besides liked the diverse civilization and friendly environment. I personally found a great alteration in my brother ‘s mentality to the concern universe. I enjoyed listening to the fantastic experiences with such enthusiasm was so reviewing to hear. What I found interesting was that every clip he shared his advanced thoughts he supported it by assorted theories he had learnt in his categories. When I joined Bangor, it was a soothing feeling to be introduced to assorted professors ( which my brother personally introduced me ) . This is of import to me, non merely because I myself am an international pupil. In add-on, go forthing place to peruse my surveies further in UK, it is of import to my household that I study in a metropolis that is safe and comparatively free from offense. Statistics show â€Å" The offense rate in North Wales is considered to be one of the lowest in the whole of the UK †[ I ] In visible radiation of above, possibly Maslow ‘s Hierarchy Need sums up so far my motives. I feel prosecuting my grade will give me an chance to non merely explore but besides fulfill my societal demands. Indeed being exposed to different cultural backgrounds will do me more socially cognizant. This is a immense motivational force for me as I want to work in a professional international environment. To sum, I feel that if you want to accomplish your end so you should hold to bask, explore and work the competences which come in our manner. The ground for taking Bangor University is that I want to make my MBA by non merely analyzing hard but besides by acquiring some planetary exposure.Approach to LearningMy attack to acquisition is based on three points: Information Gathering: To seek for the information that is required for accomplishing my ends. Measuring Information: To measure and form utile information to acquire context out of it. Implementing Strategy into Action: To aline the information to do a scheme and so implementing the utile scheme into actions. My attack to acquisition is base on mistake critiscm and rectification. This means that it is of import I foremost gather cognition for larning and so knock it and accordingly rectify it by traveling through the procedure or rating, eventually seting it into action. My attack to larning chiefly focuses on formalizing my point and so prolonging with my ain points. This attack is based on working the recent cognition that I have gained and besides utilizing different beginnings to understand the new and advanced cognition. This will profit me in two ways: One, I can expeditiously pull off today ‘s demands of the of all time altering concern environment. Two, it gives me the chance to take ends, values, programs and regulations are operationalized instead than inquiry ( Argyris and Schon, 1974 ) . Argyris et Al ( 1974 ) usage Single Loop Learning and Double Loop Learning as an alternate response is to inquiry to regulating variables themselves, to subject them to critical examinat ion. Hence they believe that Double Loop Learning is far better than Single Loop Learning Theory as it focuses on mistake unfavorable judgment and rectification. In my attack to acquisition, I find that Double Loop Learning theory best suits in accomplishing my ends.aˆÂ ¦ .Overall, my procedure of acquisition is to research my cognition and so develop a scheme which contains all positions required. Then implementing my wonts, attitude and manner of instruction in that scheme and so eventually implementing this scheme into actions by mistake unfavorable judgment and rectification. This theoretical account proposed by Onions ( 1973 ) is a true theoretical account of Learning. Harmonizing to Onions ( 1973 ) â€Å" Learning is a three procedure activity: To Develop: To blossom more to the full, conveying out all that is contained in. To Educate: To convey up from childhood, so as to organize wonts, manners, mental and physical aptitudes. To Train: To teach subject in or for some peculiar art, profession, business or pattern, to exert, pattern drill. † Pg-5 This theoretical account chiefly focuses on expeditiously alining the resources so updating it and trains it, to acquire a proper attack of larning. I tend to hold with this theoretical account and program to utilize this attack of larning in my ain learning manner.Issues in Group WorkThere are several issues which are anticipated in a group work. These issues non merely consequences in detroit the public presentation of the group but besides consequences in doing the way hard to accomplish the ends. Some of the issues are: Satisfaction: The degree of satisfaction is different for each person and therefore the procedure to make that satisfaction is different therefore I think this is the basic ground for group struggle. Since satisfaction is of two types: a ) Growth Satisfaction: It means growing of the group, how much undertaking has they done? So it is besides a basic ground for struggle. B ) Social Satisfaction: It means satisfaction of each member in a group. How much he/she is comfy in a group. This is besides a basic ground for group struggle. Planning: It means doing schemes to do usage of effectual resources like clip, attempt etc is the basic ground for group struggle. Since every member does non hold to utilize same scheme in a group. Directing: This is the most of import ground for group struggle. As it focuses on directing the clip, attempts and even member ‘s work and since each member do n't hold on this. Since every member has their ain positions on pull offing the undertakings so by and large they do n't hold on pull offing their resources. Forming: It means programming, meetings and implementing of schemes. So the leader plays a major function in this thing as a consequence of this each member did non be given to hold on forming therefore there is a struggle between leader and group members. Measuring each Member ‘s Performance: This is the major issue of struggle in a group, when you tend to measure each member ‘s public presentation in a group. How much attempts, clip is he/she giving to the group work and therefore this consequence in issues or struggles in a group. As a consequence of measuring each member ‘s public presentation makes the public presentation of group biased. Common Purpose and Specific Goals: It means each member should hold a common intent to accomplish the specified ends. Furthermore their attack must be the same in order to be in the same group. Therefore this is the ground for group struggle because each member can non hold a similar group and in order to alter the attack of each member is non an easy undertaking and therefore causes struggles. Skills: It refers to the cognition, skills each member has with him. It focuses on the accomplishment of ends. It is the root cause of group struggle. Since each member has different accomplishments and their public presentation depends upon these accomplishments. So it puts a negative position of the meber who has low accomplishments. Skills are of two types: a ) Administrative Skills: These accomplishments are required to pull off and aline the undertakings, attempts and accomplishments of members in a group. Therefore this accomplishment is besides an issue in group struggle. B ) Technical Skills: These accomplishments are required to technically stipulate the accomplishments in the group. It includes accomplishments requires in usage of engineering. If any member who is technically updated has the penchant in the group and therefore has the upper advantage in the group which makes other member covetous of him. It consequences in struggle in Group Work. Attitude of Group Members: It states as the behaviour of the group members. It means the manner they do their undertakings in a group. It focuses how much are they seting? It chiefly focuses on behaviour like are they chesty, how much clip are they giving in undertakings. It chiefly rely on members should go to in the proper manner. This is the major issue for a group struggle. If a member is non interested in making their work. They manner they pursue their occupation, responsibilities. If a member is non an effectual user of resources so it consequences in struggle. Loyalty: It means that each member should be loyal to the group work they are making. Each member should give his/her 100 % to be a loyal member of the group. They should be a loyal member so they each member can swear each other. It rely on the fact each member should be a loyal in go toing meetings, occupations and acting of responsibilities and undertakings assigned to them. If atoll any member is non loyal so it consequences in issues and struggles in a group work. Role of Each Member: It means each member should hold a similar function. One should non be biased to any member otherwise it consequences in struggles in a group work. The function of each member like acting of responsibilities, undertakings etc should be every bit balanced. If any member is excessively much over pressured so it consequences in struggles in a group work. Procedure the Group Use: It means the process a group uses should be agreed by each member otherwise it consequences in a group struggle. It is besides a major issue as to acquire each member agree on the similar processs as to acquire each member agree on the similar processs as each member has their ain thoughts and their ain manner of attacks to work. So it depends upon the leader to choose a process on the common concern of each member. Interpersonal Manners: It is an of import issue in group work. Since each member has their ain manners of working and one can non coerce anyone to alter their ain manners. So one has to accommodate and appreciate manners of each member otherwise there would be conflict in group work. Decision Devising: It includes a procedure in which determinations are taken. This is the major issue in a group work and it states all the determinations should be taken by the common concern of each member. If there are six members in a group and four agree to take determinations and the remainder two are opposing the determinations so there will be struggles in a group work. Division of Labour: It focuses that the undertakings should be every bit distributed in a group. One should non be biased with any member. Each member should give equal importance and equal responsibilities, occupation and duty. If any two member ‘s holding less work and everything is left on staying members so it raises struggle. Hence it is an of import factor which consequences in group struggles. Leadership: This is the major issue in a group struggle. Group ‘s public presentation depends upon the leader. If the leader is chesty and his manner of manner does non fit with other member ‘s so it raises struggle in the group. So one has to sure of taking the leader as a leader is the representative of the group. He is the 1 responsible for division of labor, planning, directing and forming etc. So one has to take attention of while taking a leader otherwise it consequences in struggles in a group work. Harmonizing to Joyce S. , David A. , Irwin M. , Osland Kolb Rubin â€Å" Sometimes they put less attempts to group undertakings than when they work entirely. This is known as Social Loafing. † Pg-193.Addressing Issues In Group WorkFor work outing issues in a group struggle I agree with this theoretical account. Harmonizing Joyce S. ( 2001 ) â€Å" A Model on Problem Solving Based on Theory of Experimental Learning. This theoretical account consists of four phases: Situation Analysis: What ‘s the most of import Problem- The undertaking of state of affairs analysis is to analyze the immediate situational context to find the right job to work on. Problem Analysis: What are the causes of the Problem- The undertaking of job analysis is to specify the job decently in footings of indispensable variables or factors that influence it. Solution Analysis: What ‘s the Best Solution- Solution analysis seeks to bring forth possible solutions and to prove their feasibleness for work outing the job. Execution Analysis: How do we implement the solution- Task necessity for implementing the solution must be identified and organized into consistent programs with appropriate clip deadlines and follow up ratings. † Pg-218 & A ; 219 Harmonizing to me I agree with this theoretical account and will utilize in future to work out struggles and issues in group work. As it focuses on each and every measure and give importance to each measure. Furthermore I would utilize an attack that attempts to look for job and so discoursing the jobs. After that use an attack that will turn to to solutions to these jobs. Harmonizing to me chief struggle in a group work is related Division of Labour so I strongly use such sort of attack that will supply equal and balanced distribution of labor between each member of the group. Another major issue is Decision Making Process so I should utilize a procedure which helps in taking all the determinations reciprocally agreed by each member instead than coercing the determinations on them. Furthermore I think alternatively of choosing the leader on my ain, we should keep an single vote system to choose the leader. As a leader is the representative of the group. My first focal point is to esteem and appreciate interpersonal manners. Since every person has his ain manner of working and therefore 1 has to accommodate themselves to the manners and attitude of each member. We should travel for the process that is good accepted by each member of the group. We should discourse attacks that we should utilize in a group work. We have to esteem each member ‘s facts, their clip and attempts. So we should travel for that procedure and attack with which everyone is comfy and ready to bask in working towards that attack. Another issue is forming which focuses on scheduling meetings and implementing schemes therefore it becomes a major struggle issue in a group. So in order to screen it out one should concentrate on scheduling meetings harmonizing to the convenience of each member and implement schemes after discoursing it with each member. Implement it merely after every member is pleased by that attack. In order to work out issues in group conflict one should concentrate on encouraging each member to give thoughts and so give accent on flow of thoughts, information and cognition within a group. One should cook to compromise in a group and appreciate each other ‘s thoughts. One should concentrate on effectual usage of resources and usage of wit while working in a group.

Nautilus Facts

Nautilus Facts The chambered nautilus (Nautilus pompilius) is a large, mobile cephalopod which is called a living fossil and has been the subject of poetry, artwork, math, and jewelry. They have even inspired the names of submarines and exercise equipment. These animals have been around for about 500 million years- even before the dinosaurs. Fast Facts: Chambered Nautilus Scientific Name: Nautilus pompiliusCommon Name: Chambered nautilusBasic Animal Group: InvertebrateSize: 8–10 inches in diameterWeight: Maximum of 2.8 poundsLifespan: 15–20 yearsDiet:  CarnivoreHabitat: Oceans in the Indo-Pacific regionConservation Status: Not Evaluated Description Nautiluses are invertebrates, cephalopods, and mollusks related to octopus, cuttlefish, and squid. Of all the cephalopods, nautiluses are the only animal to have a visible shell. The shell is not only beautiful, but it also provides protection. The nautilus can withdraw into the shell and seal it closed with a fleshy trapdoor called a hood. Nautilus shells can reach up to 8–10 inches in diameter. They are white on the underside with brown stripes on its upper side. This coloration helps  the nautilus blend into its surroundings. The shell of an adult nautilus contains over 30 chambers which form as the nautilus grows, following a genetically-hardwired shape known as a logarithmic spiral.  The nautiluss soft body is located in the largest, outermost chamber; the remainder of the chambers are ballast tanks that help the nautilus maintain buoyancy. When a nautilus approaches the surface, its chambers fill with gas. A duct called the siphuncle connects the chambers so that, when necessary, the nautilus can flood the chambers with water to make itself sink again. This water enters the mantle cavity and is expelled through a siphon. Chambered nautiluses have many more tentacles  than their squid, octopus and cuttlefish relatives. They have about 90 thin tentacles, which do not have suckers. Squid and cuttlefish have two and octopus have none. Geoff Brightling/Dorling Kindersley/Getty Images Species These several species are in the Nautilidae family, including five species in the genus Nautilus (Nautilus belauensis, N. macromphalus, N. pompilius, N. repertus, and N. stenomphelus) and two species in the genus Allonautilus (Allonautilus perforatus and A.  scrobiculatus). The largest of the species is N. repertus (the emperor nautilus), with a shell measuring from 8 to 10 inches in diameter and soft body parts weighing nearly 2.8 pounds. The smallest is the bellybutton nautilus (N. macromphalus), which only grows 6–7 inches. ​ Allonautilus was recently  re-discovered  in the South Pacific after thought extinct for some 30 years. These animals have a distinctive, fuzzy-looking shell.   Habitat and Distribution Nautilus pompilius is only found in the dimly lit tropical and warm temperate waters of the Indo-Pacific region in southeast Asia and Australia. It is the most widespread of any of the nautiluses and like most of the species, it spends most of the day at depths up to 2,300 feet. At night it migrates slowly up the coral reef slopes to forage for food at about 250 feet deep. Diet and Behavior Nautiluses are primarily scavengers of dead crustaceans, fish, and other organisms, even other nautiluses. However, they do prey on (living) hermit crabs and dig in the soft sediments of the sea floor for small prey pieces. Nautiluses have poor vision with two large but primitive pinhole eyes. Under each eye is a fleshy papilla about a tenth of an inch long called a rhinophore that the nautilus uses to detect its prey. When a dead fish or crustacean is detected by the nautilus, it extends its thin tentacles and swims towards the prey.  The nautilus grips the prey with its tentacles and then rips it into shreds with their beak before passing it to the radula. A nautilus moves by jet propulsion. Water enters the mantle cavity and  is forced out the siphon to propel the nautilus backward, forward, or sideways. Reproduction and Offspring With a lifespan of 15–20 years, nautiluses are the longest-living cephalopods. They take from10 to more than 15 years to become sexually mature. Nautiluses must move into warmer tropical waters to mate, and then they mate sexually when the male transfers his sperm packet to the female using a modified tentacle called a spadix. The female produces between 10 and 20 eggs each year, laying them one at a time, a process that may last throughout the year. It can take up to a year for the eggs to hatch.   Richard Merritt FRPS/Moment/Getty Images Evolutionary History Long before dinosaurs roamed the Earth, giant cephalopods swam in the sea.  The nautilus is the oldest cephalopod ancestor. It hasnt changed much over the last 500 million years, hence the name living fossil.   At first, prehistoric nautiloids had straight shells, but these evolved into a coiled shape. Prehistoric nautiluses had shells up to 10 feet in size. They dominated the seas, as fish hadnt yet evolved to compete with them for prey.  The nautiluss main prey was likely a type of arthropod called the trilobite. Threats None of the nautiluses are listed as threatened or endangered by the International Union for Conservation of Nature (IUCN). However, ongoing threats to nautiluses are recognized, including over-harvesting, habitat loss, and climate change.  One climate change-related issue is ocean acidification, which affects the nautiluss ability to build its calcium carbonate-based shell. Nautilus populations in some areas (such as in the Philippines) are declining due to over-fishing.  Nautiluses are caught in baited traps to be sold as live specimens, meat, and shells. Shells are used to make handicrafts, buttons, and jewelry, while the meat is consumed and live animals are collected for aquariums and scientific research.  According to the U.S. Fish and Wildlife Service, more than half a  million nautiluses  were  imported into the U.S. from 2005–2008.   Intensive nautilus fisheries are short-lived and devastating to local populations. Within about a decade or two, the locations become commercially nonviable. Nautiluses are especially vulnerable to over-fishing due to their slow development and reproduction rates. Populations also seem to be isolated, with little gene flow between populations and less able to recover from a loss. Although the IUCN has not yet reviewed nautilus for inclusion on the Red List due to lack of data, in January 2017, the entire family of chambered nautiluses (Nautilidae) was listed in the U.S. CITES Appendix II. This means that CITES documentation will be required for import and re-export of these species and items made from them.   Saving the Nautilus To help nautiluses, you can support nautilus research and avoid purchasing products made of a nautilus shell.  These include the shells  themselves as well as pearls and other jewelry made from the nacre from the nautiluss shell.   Westend61/Westend61/Getty Images Sources Aquarium of the Pacific.  Chambered Nautilus.Barord, Gregory J., et al. Comparative Population Assessments of Nautilus Sp. In the Philippines, Australia, Fiji, and American Samoa Using Baited Remote Underwater Video Systems. PLOS One 9.6 (2014): e100799. Print.Broad, William J. Loving the Chambered Nautilus to Death. The New York Times, October 24, 2011.Chambered nautilus. U.S. Fish and Wildlife Service International Affairs, 2017.  Daw, Adam and Gregory J. Barord. Aquarium Science: Husbandry of the Nautilus: Aspects of its Biology, Behavior, and Care. Tropical Fish Hobbyist Magazine, 2007.  Dunstan, Andrew J., Peter D. Ward, and N. Justin Marshall. Vertical Distribution and Migration Patterns of Nautilus Pompilius. PLOS One 6.2 (2011): e16311. Print.Jereb, P., and C. F. E. Robert, eds. Cephalopods of the World: An Annotated and Illustrated Catalogue of Cephalopod Species Known to Date. Vol. 1: Chambered nautiluses and sepioids (Nautilidae, Sepiidae, Sepiolidae, Sepiadariidae, Idiosepiidae and Spirulidae). Rome: Istituto Centrale per la Ricerca Scientifica e Tecnologica Applicata al Mare, 2005.   Platt, John R. Should We Stop Selling Nautilus Shells? Scientific American, June 12, 2014.Urton, James. Rare nautilus sighted for the first time in three decades. UW News, University of Washington, August 25, 2015.

Free Essays on Microprocesor History

Microprocessor History A microprocessor - also known as a CPU or Central Processing Unit - is a complete computation engine that is fabricated on a single chip. The first microprocessor was the Intel 4004, introduced in 1971. The 4004 was not very powerful - all it could do was add and subtract, and it could only do that four bits at a time. But it was amazing that everything was on one chip. Prior to the 4004, engineers built computers either from collections of chips or from discrete components (transistors wired one at a time). The 4004 powered one of the first portable electronic calculators. The first microprocessor to make it into a home computer was the Intel 8080, a complete 8-bit computer on one chip introduced in 1974. The first microprocessor to make a real splash in the market was the Intel 8088, introduced in 1979 and incorporated into the IBM PC (which first appeared in 1982 or so). If you are familiar with the PC market and its history, you know that the PC market moved from the 8088 to the 80286 to the 80386 to the 80486 to the Pentium to the Pentium-II to the new Pentium-III. All of these microprocessors are made by Intel and all of them are improvements on the basic design of the 8088. The new Pentiums-IIIs can execute any piece of code that ran on the original 8088, but the Pentium-III runs about 3,000 times faster! The following table helps you to understand the differences between the different processors that Intel has introduced over the years. Name Date Transistors Microns Clock speed Data width MIPS 8080 1974 6,000 6 2 MHz 8 0.64 MIPS First home computers 8088 1979 29,000 3 5 MHz 16 bits, 8 bit bus 0.33 MIPS First IBM PC 80286 1982 134,000 1.5 6 MHz 16 bits 1 MIPS IBM ATs. Up to 2.66 MIPS at 12 MHz 80386 1985 275,000 1.5 16 MHz 32 bits 5 MIPS Eventually 33 MHz, 11.4 MIPS 80486 1989 1,200,000 1 25 MHz 32 bits 20 MIPS Eventually 50 MHz, 41 MIPS Pentium 1993 3,100,000 0.8 60 MHz 32 bits, 64 bit bus 10... Free Essays on Microprocesor History Free Essays on Microprocesor History Microprocessor History A microprocessor - also known as a CPU or Central Processing Unit - is a complete computation engine that is fabricated on a single chip. The first microprocessor was the Intel 4004, introduced in 1971. The 4004 was not very powerful - all it could do was add and subtract, and it could only do that four bits at a time. But it was amazing that everything was on one chip. Prior to the 4004, engineers built computers either from collections of chips or from discrete components (transistors wired one at a time). The 4004 powered one of the first portable electronic calculators. The first microprocessor to make it into a home computer was the Intel 8080, a complete 8-bit computer on one chip introduced in 1974. The first microprocessor to make a real splash in the market was the Intel 8088, introduced in 1979 and incorporated into the IBM PC (which first appeared in 1982 or so). If you are familiar with the PC market and its history, you know that the PC market moved from the 8088 to the 80286 to the 80386 to the 80486 to the Pentium to the Pentium-II to the new Pentium-III. All of these microprocessors are made by Intel and all of them are improvements on the basic design of the 8088. The new Pentiums-IIIs can execute any piece of code that ran on the original 8088, but the Pentium-III runs about 3,000 times faster! The following table helps you to understand the differences between the different processors that Intel has introduced over the years. Name Date Transistors Microns Clock speed Data width MIPS 8080 1974 6,000 6 2 MHz 8 0.64 MIPS First home computers 8088 1979 29,000 3 5 MHz 16 bits, 8 bit bus 0.33 MIPS First IBM PC 80286 1982 134,000 1.5 6 MHz 16 bits 1 MIPS IBM ATs. Up to 2.66 MIPS at 12 MHz 80386 1985 275,000 1.5 16 MHz 32 bits 5 MIPS Eventually 33 MHz, 11.4 MIPS 80486 1989 1,200,000 1 25 MHz 32 bits 20 MIPS Eventually 50 MHz, 41 MIPS Pentium 1993 3,100,000 0.8 60 MHz 32 bits, 64 bit bus 10...

Evidence Based Practice and Applied Nursing Research Phase 3IP Paper

Evidence Based Practice and Applied Nursing Phase 3IP - Research Paper Example Scand J Urol , 12 (1), 34-38. Retrieved flrom: http://informahealthcare.com/doi/abs/10.3109/21681805.2013.834512 Mufti, U. B. & Dasgupta, R. (2013). Catheter-Associated Urinary Tract Infections. Urinary Tract Infection , 13 (3), 53-57. Retrieved from: http://link.springer.com/chapter/10.1007/978-1-4471-4709-1_6#page-1 Tenke, P.; KÃ ¶ves B. & Johansen T. (2013). An update on prevention and treatment of catheter-associated urinary tract infections. Curr Opin Infect Dis , 21 (7), 102-107. Retrieved from: http://journals.lww.com/co-infectiousdiseases/Abstract/2014/02000/An_update_on_prevention_and_treatment_of.16.aspx Weber, D. J., Sickbert-Bennett, E. E., Gould, C. V., Brown, V. M., Huslage, K., & Rutala, W. A. (2011). Incidence of Catheter-Associated and Non-Catheter-Associated Urinary Tract Infections in a Healthcare System. Infection Control and Hospital Epidemiology , 32 (8), 107-116. Retrieved from:

Brand Extension Essay Example | Topics and Well Written Essays - 1250 words

Brand Extension - Essay Example The strength of a brand is determined by the degree of positive attitudes that the consumers possess about it which needs to be transitioned very carefully in the new markets - like innovation, value for money, shorter order fulfilment time, effective customization as per customer needs, rewarding premium customers, etc. Loken and John (1993) argued that brand extension planning should comprise of extensive risk assessment of threats to the existing brand equity of the organization. The organization should be specifically cautious about risk of dilution of certain beliefs that the customers may be possessing about the original brand because the extended brand may contain attributes that may be incompatible with those of the established brand. Loken & John et al. ... Example, if a CRT based television manufacturer introduces computers and fails miserably, there are lesser chances of their flagship brand getting diluted. The researchers focussed on the flagship brand of Johnson's Baby Shampoo and studied impact of extended product line comprising of baby powder, baby oil, baby lotion, bandages & dental floss with respect to brand dilution due to reduced hygiene. They discovered that perception of reduced hygiene in any of these will result in dilution of all other brands including the flagship brand of baby shampoo. Yueng and Wyer (2005) probably have the answer to this phenomenon because they could prove through a complex research that "When a brand spontaneously elicits affective reactions, consumers appear to form an initial impression of the brand's new extension based on these reactions". Volkner and Sattler (2006) could establish determinants of brand extension success as - parent brand characteristics, marketing context of the target brand extension, relationship between parent brand & the brand extension and product category & characteristics of the brand extension in terms of perceived risk & consumer innovativeness. They gave special emphasis to management wisdom in mediating and moderating effects. Author's Perspective on Brand Extensions The author hereby argues that brand extension is an important brand growth strategy but needs specialist class analytics and intensive market research before arriving at the characteristics of the extended branding. This definitely should not be viewed as the short cut to success by using the existing established brand as the vehicle that is easy to